Came quickly, started not the first time, dances with a tambourine and with 5 times startanula, while it works well, all the sensors show correctly, took along with the processor came turned upside down to the head of a navel. Was without a battery, the processor was also well wrapped and put in a box to the motherboard. The seller sociable for a long time consulted with him about the processor for mother and compatibility. I advise everyone 5 out of 5
I ordered from this seller the processor e5-1650v2, this motherboard and ram 2 × 8 gb. It came to kazan in 11 days. All startanulo from the first time. Acceleration to 4,1 so far. That's enough. Time to change the video card. All games rest in 100% load 1050ti. Installing windows 10 took 15 minutes on sdd, class!
Ordered 11.11 for 7.600 rubles. Received 28.11 (120 km from moscow msk. Area.) ver 6.11 as requested. The socket seems perfect. Chipset c602j. From c602 differs that supports 6 sata and not 10. that is, there are no differences. A little bent the fins for the valve but that's what i understood from the adapter on the fm2 he was lying on top. The packaging is so-so. Родная box from motherboard wrapped in 3 layer пупырки and black bag with adhesive tape. Inside the motherboard box in the package and everything. Other sellers had a double box and inside the mamka 10 times wrapped with a gun. The processor ordered from the same seller literally almost the same day. Already 11 days hanging on loading in the plane. I don't know if he's coming or not. Mb is not even easy so the seller did. Run the mamka and check the possibilities there. When the percent comes i will add a tip.
Everything works!!! Without problems, everyone started. Determined m. 2 ssd. Rolled windu drovishki week flight normal. In general, you can take. Memory ran to 1866 in the four channel. But this motherboard without bios firmware can drive memory to 2133. Speed m.2 with ssd kingspec nmve at 512 gb in the photo below. In general, the purchase is successful)
Mamka came with two curved legs, the toothpick corrected, otherwise satisfied. Well, the seller advised how to correct the legs, a thousand apologies and so on, well, what else to do to him? Mamka new jamb under the lid protective
Maybe to whom it will be useful infa, afraid that the percent will be overheated .... I bought captain 240ex water tank, as a result the temperature under load does not exceed 43')) in short do not worry much with cooling and 120 is enough, two-section radiator is already superfluous)
The temperature of both cpu and core separately shows correctly, if you make a normal cable management and in the case of the top two turntables then additional cooling on mosfets and ddr is not necessary, due to good recerculation, everything is already cooled, barely warm even after an hour under load, the hottest link i have is vidyuha 60-63's
Got what i expected, i recommend! The parcel was sent very quickly, to krasnodar delivered exactly two weeks. Ordered mat. fee (came 6.11) immediately from xeon 1650, everything was immediately there was no dancing in the tambourine. Chases and percent and memory without any problems. There are no problems that have been read about earlier, namely:
1. sleep works. In the bios two modes, default is the one when only the processor sleeps (s1), if you put s3, then completely falls asleep and without problems wakes up.
2. excellent sound from mat. Board, before that was a good discrete card, and here the sound is no worse.
3. accelerates both cpu and memory. In my case, the percent runs without problems up to 4.2, memory up to 2133.
4. temperature sensors show quite correct values.
5. sata3 works normally and at the set speed.
The only thing i can not yet check is m.2, but more than sure that it will work fine, the main thing is to buy not m.2 sata, but m.2 nvme.
Ordered a set of x79 and 1650-2, the delivery took 16 days, started immediately, installed a 2133 ddr-3 in the biosphere chose a multiplier and everything turned on, at temperatures percent does not warm above 55, chipset writes 40 but i think 50, the temperature on the lid shows not true, but this is not the essence, the purchase is satisfied
Temperatures lie, on the cpu cover, and on the chipset, the chipset by the way c600))) but measured the temperature pyrometer is not critical))) mosfets with keys are not heated, but had to adjust the radiator